P32.31-0216-06
a Screw
b Mounting frame
c Connector
F23/1 Control module box
N16/1 Base module (BM)
N51 ADS control module
X11/4 Data link connector
| Removing, installing | ||
1 | Remove screws (a) | ||
2 | Take off mounting frame (b) | ||
3 | Unclip connector (c) at mounting frame (b) (arrows) and take out to the side | ||
4 | Install in the reverse order | If the ADS control module (N51) is replaced: always check vehicle level at front and rear axles, set and restore normal level in control module. | |
An ADS control module with red colored marking has to be reprogrammed when replaced and again identified with a red colored dot. |
Связанные документы
- ad3232p200001a Адаптивная демпфирующая система (ADS II), примечание по проверке работоспособности
- ar4020p0300e