ar3232p0500a

Removing, installing ADS control unit

Type ar · topic 32.32 · version 0100 · 1998-10-19

Applies to: MODEL 129 as of 1.9.95

Where it sits

Function group 2 Chassis › 32 Suspension › 32.32 Level control with adaptive damping system (ADS) — Series 129

EinPAS 20 Chassis › 20.16 Suspension › 20.16.11 Control unit/relay — Series 129

AR32.32-P-0500A

Removing, installing ADS control unit

4.3.97

MODEL 129 as of 1.9.95

Removing, installing ADS control unit

P32.31-0216-06

a Screw

b Mounting frame

c Connector

F23/1 Control module box

N16/1 Base module (BM)

N51 ADS control module

X11/4 Data link connector

Removing, installing

1

Remove screws (a)

2

Take off mounting frame (b)

3

Unclip connector (c) at mounting frame (b) (arrows) and take out to the side

4

Install in the reverse order

If the ADS control module (N51) is replaced: always check vehicle level at front and rear axles, set and restore normal level in control module.

AR40.20-P-0300E

An ADS control module with red colored marking has to be reprogrammed when replaced and again identified with a red colored dot.

AD32.32-P-2000-01A

Referenced documents