ar2000s1010a

Checking cooling system for leaks

Тип ar · тема 20.00 · версия 0110 · 2006-07-26

Применимость: ENGINE 111, 104.900, 601, 611.980 in MODEL 638

Нет на языке «ru»; показано на языке Английский.

Расположение

Функциональная группа 1 Двигатель › 20 Система охлаждения двигателя › 20.00 Общие сведения — Серия 601 · Серия 611 (модели 980) · Серия 638

EinPAS 15 Двигатель › 15.25 Система охлаждения двигателя › 15.25.5 Вся система охлаждения — Серия 601 · Серия 611 (модели 980) · Серия 638

Также относится к двигателям/коробкам передач: 104 900, 111 ***

AR20.00-S-1010A

Checking cooling system for leaks

9.2.95

ENGINE 111, 104.900, 601, 611.980 in MODEL 638

Checking cooling system for leaks

S20.00-3000-06

1 Expansion reservoir

2 Cap

3 Tester

Checking

Danger!

Risk of injury to skin and eyes from scalding from hot coolant which splashes out. Risk of poisoning from swallowing coolant.

Do not open the cooling system unless the coolant temperature is below 90 °C. Open cap slowly and allow the pressure to release. Do not pour coolant into containers for drinks.

Wear protective gloves, protective clothes, and eye protection.

AS20.00-Z-0001-01A

1

Adjust heater switch to maximum heat output

2

Unscrew cap (2) on expansion reservoir (1)

Replace cap (2) if corroded.

3

Check coolant level and correct if necessary.

AP20.00-D-2010A

4

Screw tester (3) onto expansion reservoir (1)

Tester

*124589152100

5

Pressurize cooling system to approx. 1.4 bar

6

All hoses of the cooling and heating system, radiator, coolant thermostat housing, coolant pump, oil / water heat exchanger and cylinder head gasket

If necessary retighten or replace hose clips after testing.

Wrench hexagon

*WH58.30-Z-1002-06A

Wrench hexagon

*WH58.30-Z-1001-06A

7

Detach tester (3)

8

Screw cap (2) onto expansion reservoir (1)

Checking cooling system for leaks

124 589 15 21 00

Tester

Commercially available tools

Number

Designation

WH58.30-Z-1001-06A

6 mm socket hexagon on flexible shaft for hose clamps with worm drive

WH58.30-Z-1002-06A

7 mm socket hexagon on flexible shaft for hose clamps with worm drive

Связанные документы