AR18.40-D-3510WE | Remove/install oil dipstick guide tube | 30.3.11 |
ENGINES 651.955 /956 /957 in MODEL 906 up to 31.8.10
D18.40-1117-09
1 Oil dipstick guide tube
2 Bolt
5 Vacuum hose
3 Bolt
4 Dipstick
| Remove/install | ||
1 | Lift/jack up vehicle | ||
2 | Unscrew bolt (3) | ||
3 | Lower vehicle | ||
4 | Remove engine trim panel | ||
5 | Unscrew bolt (2) | Push vacuum hose (5) to the side. | |
6 | Pull oil dipstick (4) out of oil dipstick guide tube (1) | Collect dripping oil using a clean dry cloth. | |
7 | Pull oil dipstick (1) guide tube out of oil pan and remove | Installation: Replace sealing ring. | |
8 | Install in the reverse order | ||
9 | Check engine oil level, correct if necessary | The engine oil level must not lie above the maximum marking. Engine damage may occur otherwise. | |
| Low SPAsh multigrade service engine oils (specification 228.51) | Sheet 228.51 | |
| Multigrade service engine oil Low SPAsh | Sheet 229.31 | |
Danger! | Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running | Secure vehicle to prevent it from moving by itself. | |
10 | Test run engine and check engine around the oil dipstick guide tube (1) for leaks |
Связанные документы
- ar0060d1000h Автомобиль приподнять, установить на опоры
- ar0110d2405we Защитный кожух двигателя: снятие / установка
- as0000z000501a Опасность аварии в результате самостоятельного начала движения при работающем двигателе. Опасность получения травмы в результат
- bb0040p022851a Всесезонные сервисные моторные масла Low SPAsh (спецификация 228.51)
- bb0040p022931a Всесезонные сервисные моторные масла Low SPAsh (спецификация 229.31)