Remove/install intake port shutoff actuator motor · ar0920d1313we · Mercedes-Benz WIS

AR09.20-D-1313WE

Remove/install intake port shutoff actuator motor

26.7.11

ENGINES 651.955 /957 in MODEL 906 with CODE (MP5) Engine version Euro 5

D09.20-1042-09

1 Electrical connector

2 Bracket

3 Bolts

4 Bolts

M72/1 Inlet port shutoff positioner

5 Aneroid capsule

6 Electrical connector

7 Locking clamp

8 Bolts

 	Remove/install
1	Remove engine trim panel		AR01.10-D-2405WE
2	Unfasten fuel filter and place to one side with the lines connected
3	Disconnect electrical connector (6)
4	Disconnect electrical connector (1)
5	Remove bolts (4) and swivel aneroid capsule (5) to one side	 Take care of control rod in the process. This can break off otherwise.
			*BA14.20-N-1014-01H
6	Undo bolts (3) and remove bracket (2)		*BA09.41-N-1018-01M
7	Unlock locking clamp (7) and remove to the rear	 Swivel locking clamp (7) upwards to unlock it.
8	Remove screws/bolts (8) and intake port shutoff positioner (M72/1)
9	Install in the reverse order

 Charge air pipe/charge air cooling

Number	Designation		Engine 651 in model 906


BA09.41-N-1018-01M	Bolt, charge air manifold to bracket	Nm	9

 Exhaust gas recirculation

Number	Designation		Engine 651 in model 906


BA14.20-N-1014-01H	Attachment of bolts, bypass valve vacuum unit holder to bypass valve	Nm	12