Remove/install flywheel / drive plate

AR03.30-P-8001RT

Remove/install flywheel / drive plate

3.9.08

11.8.08

Perform sensor adaptation - added

Step 8

 

Remove/install

 Danger!

Risk of death caused by vehicle slipping or toppling off the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

1

Remove transmission

AR27.10-P-0500RTA

2

Install retaining lock for crankshaft (5)

AR03.30-P-5000RT

3

Remove bolt (3)

 Installation: Replace bolts because the connection may loosen and the bolts may shear off if they are used again.



*BA03.30-P-1002-01D

4

Remove flex plate (2)

 Installation: The flex-plate must be installed back into the same position as the bulging caused by the bolts may generate an incorrect torque and the bolts may work loose.

5

Remove drive plate (1)

 Installation: The cylinder pin (4) determines the installation position.

6

Install in the reverse order

7

Perform default initialization

After replacing the clutch plate (1).

 Connect STAR-DIAGNOSIS and select menu item for control unit adaptations in ME control unit.



Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

8

Perform sensor adaptation

After replacing the clutch plate (1).

 Put back sensor adaptation of crankshaft position sensor (L5). Afterwards accelerate sensor adaptation of crankshaft position sensor (L5).

Number

Designation

Engine 113.94/96/97/98

BA03.30-P-1002-01D

Bolt, two-mass flywheel/drive plate to crankshaft

Stage 1

Nm

45

Stage 2

°

90