MODEL | 906.135 up to 7/31/12 |
with CODE PZ0(Package delivery vehicle, integral box body DP DHL) |
D72.20-1236-09
| Remove | ||
1 | Remove locking pin (1), old version | ||
| Install | ||
2 | Install locking pin (2), new version | Use threaded plate, old version. | |
3 | Adjust locking pin (2) | Adjust locking pin (2) so that right rear-end door is flush with left rear-end door. Locking pin (2) should engage in center of lock. Do not lift or pull down right rear-end door. | |
4 | Mark adjustment on bracket (3) | ||
5 | Scribe hole for additional attachment point (4) on bracket (3) | ||
6 | Remove locking pin (2) | ||
7 | Center punch initial crack for hole on bracket (3), drill (Ø 15 mm) and deburr | ||
8 | Install locking pin (2) and adjust to previously made marking | Use threaded plate, new version. Only position bolt (5), do not tighten. | |
9 | Check adjustment, correct if necessary | ||
10 | Tighten screw/bolt (5) |
Parts ordering note |
Part no. | Designation | Quantity |
KG 84 (siehe EPC) | Tapping plate | 1 |
KG 84 (siehe EPC) | Locking pin | 1 |