sm7220d0002a

Upgrade lock striker of rear-end door to new version

Type sm · topic 72.20 · version 0100 · 2012-07-31

Applies to: MODEL 906.135 up to 7/31/12 with CODE PZ0(Package delivery vehicle, integral box body DP DHL)

Where it sits

Function group 3 Body › 72 Doors › 72.20 Tailgate, rear door — Series 906 (models 135)

EinPAS 29 Drive authorization/security system › 29.16 Locking/unlocking › 29.16.3 Retrofitting/modification — Series 906 (models 135)

EinPAS 35 Body/frame/detachable parts › 35.35 Door › 35.35.3 Retrofitting/modification — Series 906 (models 135)

EinPAS 45 Data/information › 45.20 Information/measures › 45.20.40 Service measures — Series 906 (models 135)

SM72.20-D-0002A

Upgrade lock striker of rear-end door to new version

25.7.12

MODEL

906.135 up to 7/31/12

with CODE PZ0(Package delivery vehicle, integral box body DP DHL)

Upgrade lock striker of rear-end door to new version

D72.20-1236-09

Remove

1

Remove locking pin (1), old version

Install

2

Install locking pin (2), new version

Use threaded plate, old version.

3

Adjust locking pin (2)

Adjust locking pin (2) so that right rear-end door is flush with left rear-end door. Locking pin (2) should engage in center of lock. Do not lift or pull down right rear-end door.

4

Mark adjustment on bracket (3)

5

Scribe hole for additional attachment point (4) on bracket (3)

6

Remove locking pin (2)

7

Center punch initial crack for hole on bracket (3), drill (Ø 15 mm) and deburr

8

Install locking pin (2) and adjust to previously made marking

Use threaded plate, new version. Only position bolt (5), do not tighten.

9

Check adjustment, correct if necessary

10

Tighten screw/bolt (5)

Parts ordering note

Part no.

Designation

Quantity

KG 84 (siehe EPC)

Tapping plate

1

KG 84 (siehe EPC)

Locking pin

1