si6000z0014a

Service Information: Handling lead-free filling solder

Tip si · temă 60.00 · versiune 0100 · 2013-06-17

Valabil pentru: MODEL ALL

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 60 Structură generalităţi › 60.00 Generalităţi — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.20 Cabină şofer/Caroserie › 35.20.1 Informaţie de bază — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.21 Şasiu › 35.21.1 Informaţie de bază — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.30 Ansamblu faţă › 35.30.1 Informaţie de bază — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.31 Perete spate/hayon › 35.31.1 Informaţie de bază — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.32 Structură inferioară › 35.32.1 Informaţie de bază — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.34 Perete lateral › 35.34.1 Informaţie de bază — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.35 Uşă › 35.35.1 Informaţie de bază — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.36 Capotă/Clapetă/Capac › 35.36.1 Informaţie de bază — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.37 Aripă › 35.37.1 Informaţie de bază — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.39 Plafon › 35.39.1 Informaţie de bază — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 45 Date/Informaţie › 45.20 Informaţie/Măsuri › 45.20.20 Informaţie service — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

Valabil și pentru motoare/cutii de viteze: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

SI60.00-Z-0014A

Service Information: Handling lead-free filling solder

14.6.13

MODEL

ALL

Please remember that a ban on using leaded materials on vehicles which were put into service after 01.06.2003 was introduced as part of the European end-of-life vehicle directive (2000/53/EC). For this reason, it is no longer permitted to use leaded body solder on these vehicles.

Handling unleaded body solder

Owing to the narrow temperature window of unleaded body solder, the possible applications compared to leaded body solder are limited. The use of unleaded body solder is suitable for approved repair methods, e.g. the filling of transitions or seams in the case of welded-in or MIG-soldered parts.

The time required for operations involving unleaded body solder is already taken into consideration in the respective operation items.

Note

The use of unleaded body solder is also intended for the repair of edges and the boundaries of components. Unleaded body solder is always suitable for large-scale filling to repair components. Component surfaces must be repaired properly by planishing and straightening. Any remaining surface irregularities must be smoothed out using approved spackle materials in accordance with the processing instructions from the supplier.

Information on approved spackle materials

Mercedes-Benz After-Sales portal: http://aftersales.mercedesbenz.com

	Service Information: brazing materials for MIG brazing		SI60.00-P-0006A
	Service Information: MIG soldering on structure components and outer paneling		SI60.00-P-0007A
	Service Information: Cleaning of tin-plated surfaces	MODEL ALL	SI98.00-P-0019A

Documente menționate