si4600p0001a

Service Information: Redocumentation of steering gear in VeDoc

Tip si · temă 46.00 · versiune 0100 · 2011-08-15

Valabil pentru: MODEL all

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 46 Direcţie › 46.00 Generalităţi — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 25 Rețea de bord/Rețea/Multi-funcție › 25.15 Rețea/Multi-funcție › 25.15.20 Codare/Parametrare — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

EinPAS 45 Date/Informaţie › 45.20 Informaţie/Măsuri › 45.20.20 Informaţie service — Seria 900 (modele 9**) · Seria 902 (modele 9**) · Seria 904 (modele 918, 919, 924, 925, 938, 943, 957) · Seria 906 (modele 917, 918, 924, 953)

Valabil și pentru motoare/cutii de viteze: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

SI46.00-P-0001A

Service Information: Redocumentation of steering gear in VeDoc

11.8.11

MODEL all

Service Information: Redocumentation of steering gear in VeDoc

P00.00-4765-08

Entry in VeDoc, shown with German menu interface

A Vehicles

B Major assemblies

C General

In accordance with ISO 9001 it is necessary for the traceability of safety-relevant components to be assured. For this reason, please remember that when the steering is replaced, that this also has to be redocumented in VeDoc similar to the procedural instruction for the engine and transmission (1200-17A handling engine-transmission numbers).

To this end, the steering number and the object number for the newly installed steering must be entered into VeDoc.

If you do not have write access to VeDoc to make the necessary entries, please contact your next higher-up organizational unit that has write access to VeDoc. It is to be notified in writing per fax or email about the scopes to be redocumented.