ar9710p400002ff

Seam sealing following repair, rear end damage

Tip ar · temă 97.10 · versiune 0100 · 2005-02-09

Valabil pentru: MODEL 454.0

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 97 Cheder, protecţie anticorozivă › 97.10 Cheder — Seria 454 (modele 0**)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.31 Perete spate/hayon › 35.31.1 Informaţie de bază — Seria 454 (modele 0**)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.34 Perete lateral › 35.34.1 Informaţie de bază — Seria 454 (modele 0**)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.37 Aripă › 35.37.1 Informaţie de bază — Seria 454 (modele 0**)

EinPAS 40 Conservare/Vopsire › 40.20 Protecţie la coroziune › 40.20.30 Etanşare cordon sudură — Seria 454 (modele 0**)

AR97.10-P-4000-02FF

Seam sealing following repair, rear end damage

Seam sealing following repair, rear end damage

P97.10-2532-06

Outer rear

Seam sealing following repair, rear end damage

P97.10-2615-06

Inner rear

Seam sealing following repair, rear end damage

P97.10-2531-06

Rear wheelhouse

Seam sealing following repair, rear end damage

P97.10-2535-09

Outer floor assembly

1 Seal spot welds of area to be repaired with seam sealing material.

Insert plastic plugs and rubber grommets with sealing compound. Keep sealant out of threads on weld nuts and threaded bolts by masking or covering with cardboard sleeves.

Also keep sealant out of drain openings and contact surfaces for axle mounts, washers and attachment parts. It is necessary to seal accessible spot weld flanges on both sides. If accessible from one side only seal corresponding surface.
Observe standard sealing!