ar9710p400002f

Seam sealing following repair, rear end damage

Tip ar · temă 97.10 · versiune 0100 · 2002-12-11

Valabil pentru: MODEL 210.0

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 97 Cheder, protecţie anticorozivă › 97.10 Cheder — Seria 210 (modele 0**)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.31 Perete spate/hayon › 35.31.1 Informaţie de bază — Seria 210 (modele 0**)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.34 Perete lateral › 35.34.1 Informaţie de bază — Seria 210 (modele 0**)

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.37 Aripă › 35.37.1 Informaţie de bază — Seria 210 (modele 0**)

EinPAS 40 Conservare/Vopsire › 40.20 Protecţie la coroziune › 40.20.30 Etanşare cordon sudură — Seria 210 (modele 0**)

AR97.10-P-4000-02F

Seam sealing following repair, rear end damage

Insert plastic plugs and rubber grommets with sealing compound.

Keep thread of welding nuts and threaded bolts free from sealant by masking with tape or by covering with cardboard sleeves. Also keep contact surfaces for axle mounts, windows and detachable body components free of sealant.

Seal spot welding flange on both sides, where accessible. If accessible from one side only seal corresponding surface.

Observe standard seals!

Seam sealing following repair, rear end damage

P97.10-2125-09

Rear end and rear wheelhouse liner

Seam sealing following repair, rear end damage

P97.10-2126-09

Luggage compartment; rear end center assembly, rear axle cross member and wheelhouse liner