D88.50-0001-06
Shown on vehicle with removed license plate number
1 Adapter plate
2 Screw
3 Clip
E19/1 Left license plate lamp
E19/2 Right license plate lamp
D88.50-0002-06
4 Electrical connector
5 Electrical connector
6 Catch hook
7 Clip
8 Wiring harness
9 Passage
10 Collar nut
| Remove/install | ||
Danger! | Risk of injury caused by fingers being pinched or crushed when removing, installing or aligning hoods, doors, trunk lids, liftgates or sliding roof | Keep body parts and limbs well clear of moving parts. | |
1 | Remove license plate. | ||
2 | Remove bolts (2) | ||
3 | Remove door trim from left rear-end door | Model 900 except code (ZU1) Minibus | |
Model 900 with code (ZU1) Minibus | |||
4 | Disconnect electrical connector (4) from electrical coupling (5) | ||
5 | Actuate catch hook (6) and remove electrical coupling (5) from clip (7) | ||
6 | Unscrew collar nuts (10). | ||
7 | Remove adapter plate (1) from left rear-end door | Pull adapter plate (1) downward so that the clips (3) unclip from the left rear-end door, Check clips (3) for damage, replace if necessary | |
8 | Remove passage (9), expose electrical wiring harness (8) and remove adapter plate (1) | Installation: Ensure that passage (9) is seated correctly. | |
9 | Remove license plate lamp (E19/1) and right license plate lamp (E19/2) | Only when replacing adapter plate or left license plate lamp (E19/1) or right license plate lamp (E19/2). | |
10 | Install in the reverse order |
Documente menționate
- ar7220d6615a Demontarea, montarea capitonajului uşii hayon
- ar7220d6615ch
- as0000z001101a Pericol de rănire prin prinderea sau strivirea degetelor la operaţii de demontare, montare şi reglare la capote, uşi, capace şi tavan culisant