ar7220d6615ch

Remove/install rear-end door trim

Tip ar · temă 72.20 · versiune 0101 · 2012-01-16

Valabil pentru: MODEL 900 with CODE (ZU1) Minibus

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 72 Uşi › 72.20 Uşă hayon — Seria 900

EinPAS 37 Echipament interior › 37.45 Capitonaj › 37.45.31 Capitonaj ușă — Seria 900

AR72.20-D-6615CH

Remove/install rear-end door trim

7.12.11

MODEL 900 with CODE (ZU1) Minibus

Remove/install rear-end door trim

D72.20-1229-08

Shown on right rear-end door

1.1 Bottom section paneling

1.2 Paneling upper section

4 Screw

2 Cap

3 Screwdriver

Remove/install

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

1

Remove cover from inside door opener

Only on right rear-end door.

Cover cannot be removed without damage. For this reason the cover should always be replaced after removal.

Long wedge

*115589035900

2

Unclip paneling bottom section (1.1) and remove

To remove paneling top section (1.2) first remove paneling bottom section (1.1)

Installation: Check clips for damage, replace if necessary.

Clip remover

*452589016300

Long wedge

*115589035900

3

Unclip caps (2) from paneling top section (1.2) with suitable screwdriver (3)

Unclip caps (2) at top as shown with screwdriver (3) and pivot downward

Installation: Observe installation position.

4

Remove screws/bolts (4)

5

Unclip paneling top section (1.2) and remove

Installation: Check clips for damage, replace if necessary.

Long wedge

*115589035900

Clip remover

*452589016300

6

Install in the reverse order

Remove/install rear-end door trim
Remove/install rear-end door trim

452 589 01 63 00

Clip remover

Long wedge

115 589 03 59 00

Documente menționate