ar8230p6900rt

Remove/install rear window wiper motor

Tip ar · temă 82.30 · versiune 0100 · 2005-05-20

Valabil pentru: MODELS 251

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 82 Instalaţie electrică, structură › 82.30 Ştergător parbriz — Seria 251

EinPAS 36 Vizibilitate › 36.30 Ştergere/Spălare › 36.30.50 Instalație de spălat parbrizul — Seria 251

AR82.30-P-6900RT

Remove/install rear window wiper motor

1.3.05

MODELS 251

Remove/install rear window wiper motor

P82.30-2512-07

1 Bolts

2 Electrical connector

3 Rear window feed-through rubber

M6/4 Tailgate wiper motor

Remove/Install

Danger!

Injury Hazard! Windshield wiper mechanism can pinch, crush or, in extreme cases even sever extremities.

Always remove ignition key when working on windshield wiper mechanism.

AS82.30-Z-0001-01A

1

Remove liner on tailgate

AR72.20-P-3520RT

2

Remove wiper arm of rear-end door

AR82.30-P-6910RT

3

Disconnect electric connector (2)

4

Remove screws (1) from tailgate wiper motor

5

Remove rear window wiper motor (M6/4)

Installation: Replace rear window feed-through rubber (3) if required. Note the installation position!

Installation: Grease rear window feed-through rubber (3) slightly.

6

Install in the reverse order

Documente menționate