ar6850s0004e

Remove/install roller sunblind for side window

Tip ar · temă 68.50 · versiune 0101 · 2018-09-13

Valabil pentru: Model 447.8 with code ZK7 (Equipment line MARCO POLO)

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 68 Echipament interior › 68.50 Perdea, rulouri, plase pentru bagaje, sisteme de ancorare a încărcăturii — Seria 447 (modele 8**)

EinPAS 37 Echipament interior › 37.57 Protecţie lumină/Perdea de camuflaj › 37.57.31 Rulou/Perdea — Seria 447 (modele 8**)

AR68.50-S-0004E

Remove/install roller sunblind for side window

12.09.2018

Model

447.8

with code ZK7 (Equipment line MARCO POLO)

Remove/install roller sunblind for side window

S68.50-4522-09

Shown on right side window in rear

1

Roller sun blind

3

Screw

2

Cover

Warning

Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.

No parts of the body or limbs should be within the operating area when the components are moving.

AS00.00-Z-0011-01A

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove/install

1

Unclip cover (2) on both sides and remove

Mounting wedge

*110589035900

2

Unscrew bolt (3) on both sides and remove roller sun blind (1)

Installation: Ensure that roller sun blind (1) are installed in correct assembly position.

3

Install in the reverse order

Check

4

Check roll-up mechanism of roller sun blind (1)

Remove/install roller sunblind for side window

110 589 03 59 00

Mounting wedge

Documente menționate