ar6850s0004e

Remove/install roller sunblind for side window

Type ar · topic 68.50 · version 0101 · 2018-09-13

Applies to: Model 447.8 with code ZK7 (Equipment line MARCO POLO)

Where it sits

Function group 3 Body › 68 Interior equipment › 68.50 Curtains, roller blinds, luggage nets, cargo retainers — Series 447 (models 8**)

EinPAS 37 Interior equipment › 37.57 Light protection/sightproofing › 37.57.31 Roller blind/curtain — Series 447 (models 8**)

AR68.50-S-0004E

Remove/install roller sunblind for side window

12.09.2018

Model	447.8
	with code ZK7 (Equipment line MARCO POLO)

Remove/install roller sunblind for side window

S68.50-4522-09

Shown on right side window in rear

1	Roller sun blind		3	Screw
2	Cover

 Warning	Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
Topical note	Notes on carrying out repair work in the vehicle interior		AH68.00-N-0001-01S
 	Remove/install
1	Unclip cover (2) on both sides and remove	 Mounting wedge	*110589035900
2	Unscrew bolt (3) on both sides and remove roller sun blind (1)	 Installation: Ensure that roller sun blind (1) are installed in correct assembly position.
3	Install in the reverse order
	Check
4	Check roll-up mechanism of roller sun blind (1)

Remove/install roller sunblind for side window

110 589 03 59 00

Mounting wedge

Referenced documents

ah6800n000101s Notes on carrying out repair work in the vehicle interior
as0000z001101a Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.