Remove/install rear roof paneling

AR68.30-P-7608H

Remove/install rear roof paneling

08.03.2019

Model

240.0

1

Rear headliner

5

Roof crossbeam trim

E11/1

Left rear reading lamp

2

Front roof lining

6

Edge guard

E11/2

Right rear reading lamp

3

C-pillar paneling

7

Roof crossbeam

E15/1

Center rear dome lamp

4

Grab handle

8

Curtain rail

 

Remove/install

Topical note

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

1

Remove left and right B-pillar trim

AR68.30-P-4700H

2

Remove left and right C-pillar trim (3)

AR68.30-P-4490H

3

Remove reading lamp of the left and right rear passenger compartment (E11/1, E11/2)

AR82.20-P-1120H

4

Remove left and right grab handles (4)

AR68.30-P-4330H

5

Remove center rear dome lamp (E15/1)

AR82.20-P-0113H

6

Remove roof crossbeam trim (5)

AR68.30-P-7606H

7

Detach edge guard (6) in the area of the rear roof lining (1) from the body

 Secure rear roof lining (1) against falling down.

8

Carefully pull rear roof lining (1) downward until the rear roof lining (1) can be pushed over the roof crossbeam (7)

9

Pull rear roof lining (1) toward the front (arrows) until it is completely extended out of the curtain rail (8)


Carefully pull rear roof lining (1) toward the front,
to prevent damage resulting from the sharp edges of the roof crossbeam (7).

10

Lower rear roof lining (1) and extend sideways out of the door cutout

11

Install in the reverse order