P68.30-3274-06
1 Side paneling
2 Covering
3 Bolts
4 Edge guard
5 Damping material
6 Trim
7 Nut
8 Expansion clip
9 Retaining clips
S21/3 Left rear power window switch
S21/4 Right rear power window switch
| Remove/install | ||
1 | Loosen rear seat backrest until rear seat backrest can be pulled toward front in area of side paneling (1) so that upper nut (7) can be loosened. | Do not fold down head restraints in rear. | |
2 | Lower left and right rear side window | ||
3 | Loosen door sill molding in rear area. | | |
4 | Remove cover (2) | ||
5 | Loosen edge guard (4). | ||
6 | Remove vapor barrier (5) | ||
7 | Pull paneling (6) toward front and remove. | ||
8 | Loosen upper nut (7), do not unscrew completely. | ||
9 | Unscrew lower nut (7). | ||
10 | Remove expansion clip (8). | ||
11 | Unclip side paneling (1) from bottom, raise, loosen from inner sealing rail and tilt toward inside. | Installation: Ensure that side paneling (1) is seated correctly in inner sealing rail. | |
12 | Disconnect electrical connector from left rear power window switch (S21/3) or right rear power window switch (S21/4) | ||
13 | Remove side paneling (1) | ||
14.1 | Remove retaining clips (9) from rear of side paneling (1). | When replacing side paneling (1). | |
15 | Install in the reverse order |
Wedge tool
110 589 03 59 00