Remove/install side paneling in rear

AR68.30-P-4780SC

Remove/install side paneling in rear

6.7.06

 

Remove/install

1

Loosen rear seat backrest until rear seat backrest can be pulled toward front in area of side paneling (1) so that upper nut (7) can be loosened.

 Do not fold down head restraints in rear.

AR91.12-P-1620SC

2

Lower left and right rear side window

3

Loosen door sill molding in rear area.



*110589035900

4

Remove cover (2)

5

Loosen edge guard (4).

6

Remove vapor barrier (5)

7

Pull paneling (6) toward front and remove.

8

Loosen upper nut (7), do not unscrew completely.

9

Unscrew lower nut (7).

10

Remove expansion clip (8).

11

Unclip side paneling (1) from bottom, raise, loosen from inner sealing rail and tilt toward inside.

 Installation: Ensure that side paneling (1) is seated correctly in inner sealing rail.

12

Disconnect electrical connector from left rear power window switch (S21/3) or right rear power window switch (S21/4)

13

Remove side paneling (1)

14.1

Remove retaining clips (9) from rear of side paneling (1).

When replacing side paneling (1).

15

Install in the reverse order