P68.30-3275-09
1 C-pillar paneling
2 Seat belt cover
3 Retaining clamp
7 Seal
8 Headliner
9 Seat belt
4 Sheet metal nut
5 Mounting bolt
6 Rear shelf paneling
Modification notes
| Removing | ||
1 | Remove rear passenger compartment side trim panel | ||
2 | Remove seat belt cover (2) toward front and lay down to side with seat belt (9) installed. | ||
3 | Unclip C-pillar paneling (1) from retaining clip (3) by hand. | ||
4 | Firmly press C-pillar paneling (1) toward front, detach from C-pillar and remove. | ||
5 | Remove sheet metal nut (4) from mounting bolts (5) on C-pillar. | ||
| Install | ||
6 | Install sheet metal nut (4) in C-pillar paneling (1). | ||
7 | Insert C-pillar paneling (1) with guides (arrows) in rear shelf paneling (6) and push toward rear. | Ensure that all guides (arrows) of the C-pillar paneling (1) reach into the corresponding mounts in the rear shelf paneling (6). | |
8 | Clip C-pillar paneling (1) to C-pillar and press on in area of sheet metal nut (4) until the transition to the headliner (8) is adjusted. | ||
9 | Install seat belt cover (2). | Do not twist seat belt (9) | |
10 | Install side paneling in rear passenger compartment | ||
11 | Position seal (7) on C-pillar paneling (1). |