Remove/install headliner

AR68.30-P-4300GZ

Remove/install headliner

13.2.06

 

Remove/install

1

Remove front overhead control panel.

AR82.20-P-1100GZ

2

Remove sun visors

AR68.60-P-5480GZ

3

Remove paneling on A-pillar.

AR68.30-P-4050GZA

4

Remove front grab handles from roof

AR68.30-P-4330GZ

5

Completely move front seats toward front, position backrests upright and move head supports (front and rear) upward.

 As support for headliner (14).

6

Remove paneling on B-pillar

 Remove only top section

AR68.30-P-4700GZ

 Installation : Install mount in bolts and button in locking pawl.It should be possible to adjust and arrest the seat belt height adjustment.

7

Remove rear grab handle from roof

AR68.30-P-4330GZA

8.1

Remove Parktronic system warning display (PTS) in rear

 Only with Parktronic system (PTS),
code 220.

AR54.65-P-0007GZ

9

Remove rear dome lamp

AR82.20-P-0113GZ

10.1

Remove air vent from air outlet openings (16)

 Only on vehicles with rear air conditioner, code 582.

 Long wedge

*115589035900

11

Remove side paneling in trunk

Model 164.1

AR68.30-P-4800GZ

Model 164.8

AR68.30-P-4800RT

12

Remove panelings from C-pillar

AR68.30-P-4490GZ

13

Remove panelings from D-pillar

AR68.30-P-4495GZ

14

Disconnect electrical connectors (1, 2, 3, 4, 5)

 The number and location of the connectors (1, 2, 3, 4, 5) can vary depending on the vehicle model and equipment.

15

Disconnect ground (right wheelhouse in luggage compartment (W7)

16

Pull back electrical line (6), wiring harness (7) and ribbon cables (8) over check strap.

 Installation : Guide back electrical line (6), wiring harness (7) and ribbon cables (8) over check strap (9) to ensure proper function of the airbag!

17

Remove bolts (12)

18

Unclip clips (13)

19

Unclip covers (10, 11)

 Unclip from rear.

20.1

Unclip clips (arrows A)

 Only with power glass tilting/sliding, code 414.

21

Loosen Velcro strip mounts between headliner (14) and roof paneling.

22.1

Unclip plastic clip (17) and remove toward right from air guide pipe.

 Only on vehicles with rear air conditioner, code 582.

23

Remove headliner (4) toward front (arrow B), then downward (arrows C).

 Support headliner (14) in rear area with aid of helper. Danger of breaking!

 Only toward front (arrow B) on electric power glass tilting/sliding roof, code 414.

24

Remove headliner (14) toward rear from vehicle and lay down on clean subsurface.

 With aid of helper.

25.1

Remove speaker covers (15) from headliner (14), cut out openings for speaker covers (15).

 Only on vehicles with sound system, code 810, and if headliner (14) is to be replaced.

 The headliner (14) is only available without openings for the speaker covers (15).On vehicles with sound system, code 810 it is necessary to cut out the openings later.

 Use old headliner (14) as template.

 Prevent headliner fabric cover (14) from fraying (e.g. by gluing).

26

Install in the reverse order