P68.30-0231-06
1 Headliner
4 Clip (rear dome lamp)
5 Retaining strips
6 Hook
P68.30-0232-09
2 Headliner (tilting/sliding roof)
3 Bar
4 Clip (rear dome lamp)
5 Retaining strip
7 Clip (side of sliding roof cutout)
8 Rail
9 Clip (bar)
| Removal, installation | ||
1.1 | Open tilting/sliding roof panel | Electrically operated tilting/sliding roof (code 412b or 414a) | |
2 | Remove interior mirror | ||
3 | Remove front dome lamp | ||
4 | Remove sun visors | ||
5 | Remove grab handles | ||
6 | Remove rear dome lamp | ||
7 | Remove edge guard on door cutout | ||
8 | Remove lining on A-pillar | ||
9 | Remove lining on B-pillar | Do not remove seat belt end fitting | |
10 | Remove lining on C-pillar | Do not remove seat belt end fitting | |
11 | Remove front door | Right front door | |
12 | Lower backrests on front seats | ||
13 | Move gearshift lever toward rear | ||
14.1 | Remove bar (3) at front of sliding roof cutout | Electrically operated tilting/sliding roof (code 412b or 414a) When installing hook clip (9) in with | |
15 | Pull clip (4) out of dome lamp cutout | ||
16.1 | Detach hook (6) toward rear | Vehicles without electrically operated tilting/sliding roof | |
17.1 | Detach headliner (2) at front of tilting/sliding roof frame | Electrically operated tilting/sliding roof (code 412b or 414a) | |
18.1 | Detach clips (7) | Electrically operated tilting/sliding roof (code 412b or 414a) Detach from tilting/sliding roof frame | |
remove rail (8). | |||
19 | Pull headliner off of retaining strips (5) | ||
20.1 | Detach bar (arrows) on tilting/sliding roof frame toward front | Electrically operated tilting/sliding roof (code 412b or 414a) | |
21 | Remove headliner through right front door | ||
22 | Reinstall in opposite order |