ar6830p4300cy

Remove/install headliner

Tip ar · temă 68.30 · versiune 0200 · 2011-09-13

Valabil pentru: MODEL 204.9

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 3 Suprastructură › 68 Echipament interior › 68.30 Capitonaje, ramă ornament — Seria 204 (modele 9**)

EinPAS 37 Echipament interior › 37.45 Capitonaj › 37.45.32 Capitonaj plafon — Seria 204 (modele 9**)

AR68.30-P-4300CY

Remove/install headliner

2.9.11

MODEL 204.9

Remove/install headliner

P68.30-3374-09

Shown with code (413) Panorama sliding roof

1 Headliner

2 Cover

3 Electrical connector

4 Inside rearview mirror bracket

5 Sun visor

A67 Inside rearview mirror

B38/1 Light sensor
(without code (345) Rain sensor)

B38/2 Rain/light sensor
(with code (345) rain sensor)

N70/3 Overhead control panel electronics

6 Grab handle

7 Luggage net holder cover

8 Cover

9 Edge guard

Remove/install headliner

P68.30-3353-05

With code (413) Panoramic sliding roof

shown with code (220) Parktronic system (PTS) and code (810) Sound system and code (882) Interior monitoring (only with ATA)

1 Headliner

10 Velcro strips

11 Hook

Remove/install headliner

P68.30-3376-05

Without code (413) Panoramic sliding roof

Shown with code (220) Parktronic system (PTS)

1 Headliner

10 Velcro strips

11 Hook

Remove/install headliner

P68.30-3375-06

12 Right rear cable duct

13 Lugs

14 Electrical connector

15 Wiring harness

Modification notes

28.8.11

Installation: Replace luggage net holder covers, added

Operation step 9

Remove/install

1

Open panoramic sliding roof

On vehicles with code (413) Panoramic sliding roof

2

Remove cover (2)

3

Remove inside rearview mirror (A67)

4

Remove electronic overhead control panel (N70/3)

AR82.20-P-1000CW

5

Disconnect electrical connector (3) from light sensor (B38/1) or rain/light sensor (B38/2).

Depending on vehicle equipment.

6

Remove inside rearview mirror bracket (4)

7

Remove roller sun blind (5) from counterbearing

8

Remove grab handles (6) on roof

9

Remove all luggage net holder covers (7) from roof

Installation: It is necessary to replace all luggage net holder covers (7).

10

Remove paneling (8) from left and right B-pillar

11

Remove left and right C-pillar paneling

AR68.30-P-4490CY

12

Remove left and right D-pillar paneling

AR68.30-P-4495CY

13

Remove all edge guards (9) in area of headliner (1)

Do not remove sealing frame from rear-end door, otherwise it is necessary to replace the sealing frame on the rear-end door.

14

Open cable duct (12) at right rear on shackles (13)

15

Expose wiring harness (15) to electrical connectors (14) and disconnect electrical connectors (14).

16

Unhook headliner (1) from front panoramic roof frame

On vehicles with code (413) Panoramic sliding roof

17

Detach headliner (1) on velcro strips (10) from roof paneling

Reach between headliner (1) and roof paneling and loosen Velcro strips (10) one after another by hand. Do not pull headliner (1).Otherwise the headliner (1) can be damaged.

18

Slide headliner (1) toward rear until hooks (11) disengage from mounts on roof paneling. Then remove headliner (1) from vehicle through liftgate cutout

Aid of helper required.

Installation: Position headliner (1) below A-pillar panelings when moving forward.

Position frame seal of liftgate on headliner (1).

19

Install in the reverse order

Documente menționate