P68.30-3352-09
Shown with code (413) Panoramic sliding roof and code (345) Rain sensor and code (942) Load compartment package
1 Headliner
2 Cover
3 Electrical connector
4 Inside rearview mirror bracket
5 Sun visor
6 Grab handle
7 Luggage net bracket
8 Trim
N70 Overhead control panel control unit (with code (414) Power glass tilting/sliding sunroof)
N70/3 Overhead control panel electronics (without code (414) Power glass tilting/sliding sunroof)
9 Edge guards
A67 Inside rearview mirror
B38/1 Light sensor (without code (345) Rain sensor)
B38/2 Rain/light sensor (with code (345) Rain sensor)
P68.30-3353-05
Shown with code (413) Panoramic sliding roof and code (220) Parktronic system (PTS) and code (810) Sound system and code (882) Interior monitoring (with ATA only)
1 Headliner
10 Velcro strips
11 Hook
P68.30-3357-05
Shown with code (414) Power glass tilting/sliding roof
1 Headliner
10 Velcro strips
11 Hook
| Remove/install | ||
1 | Open panoramic sliding roof | On vehicles with code (413) Panoramic sliding roof | |
2 | Open tilting/sliding roof | On vehicles with code (414) Power glass tilting/sliding roof | |
3 | Remove cover (2) | ||
4 | Remove inside rearview mirror (A67) | ||
5 | Remove overhead control panel control unit (N70) or overhead control panel electronics (N70/3) | Depending on vehicle configuration. | |
6 | Disconnect electrical connector (3) from light sensor (B38/1) or rain/light sensor (B38/2) | Depending on vehicle configuration. | |
7 | Remove inside rearview mirror bracket (4) | ||
8 | Remove roller sun blind (5) from counterbearing | ||
9 | Remove grab handles (6) on roof | ||
10 | Remove luggage net brackets (7) from roof | ||
11 | Remove paneling (8) from left and right B-pillar | ||
12 | Remove left and right C-pillar paneling | ||
13 | Remove left and right D-pillar paneling | ||
14 | Disconnect left wiring harness from headliner | On vehicles with code (810) Sound system | |
15 | Disconnect right wiring harness from headliner | On vehicles with code (220) Parktronic system (PTS) or code (882) Interior monitoring (with ATA only) | |
16 | Remove all edge guards (9) in area of headliner (1) | ||
17 | Unhook headliner (1) from sliding roof frame or panoramic roof frame | On vehicles with code (413) Panorama sliding roof or code (414) Power glass tilting/sliding roof | |
18 | Detach headliner (1) on Velcro strips (10) from roof paneling | Reach between headliner (1) and roof paneling and loosen Velcro strips (10) one after another by hand. Do not pull on headliner (1) to prevent damaging headliner (1). | |
19 | Slide headliner (1) toward rear until hooks (11) disengage from mounts on roof paneling. Then remove headliner (1) from vehicle through tailgate cutout | Aid of helper required. | |
Installation: Position headliner (1) below A-pillar panelings when moving forward. Position frame seal of tailgate on headliner (1). | |||
20 | Install in the reverse order |
Documente menționate
- ar6830p430017cx
- ar6830p430018cx
- ar6830p4490cx
- ar6830p4495cx
- ar8220p1000cw Demontarea, montarea calculatorului unităţii de comandă la plafon