Serii
ro
ar6000p070001qa
Gap dimensions on hoods, doors and lids
Tip ar · temă 60.00 · versiune 0103 · 2009-11-17
Valabil pentru: MODEL 209.4
Nu este disponibil în „ro”; afișat în Engleză.
Încadrare
Grupă funcțională 3 Suprastructură › 60 Structură generalităţi › 60.00 Generalităţi — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.20 Cabină şofer/Caroserie › 35.20.30 Cabină şofer — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.35 Uşă › 35.35.40 Uşă faţă — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.35 Uşă › 35.35.41 Ușă mijloc — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.35 Uşă › 35.35.43 Ușă hayon — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.35 Uşă › 35.35.44 Ușă culisantă — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.35 Uşă › 35.35.45 Uşă şofer — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.35 Uşă › 35.35.46 Uşă spate — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.35 Uşă › 35.35.47 Uşă de urgenţă — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.35 Uşă › 35.35.48 Uşă ridicare — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.35 Uşă › 35.35.49 Uşă portbagaj — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.36 Capotă/Clapetă/Capac › 35.36.30 Capotă motor — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.36 Capotă/Clapetă/Capac › 35.36.31 Capotă faţă — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.36 Capotă/Clapetă/Capac › 35.36.33 Capac hayon/Capotă portbagaj — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.36 Capotă/Clapetă/Capac › 35.36.34 Clapetă rezervor/Clapetă priză — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.36 Capotă/Clapetă/Capac › 35.36.60 Clapetă revizie/Clapetă service — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.36 Capotă/Clapetă/Capac › 35.36.61 Clapetă portbagaj — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.51 Ușă pasager 1 › 35.51.32 Batante de ușă/cadru ușă — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.52 Ușă pasager 2 › 35.52.32 Batante de ușă/cadru ușă — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.53 Ușă pasager 3 › 35.53.32 Batante de ușă/cadru ușă — Seria 209 (modele 4**)
EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.54 Ușă pasager 4 › 35.54.32 Batante de ușă/cadru ușă — Seria 209 (modele 4**)
AR60.00-P-0700-01QA
Gap dimensions on hoods, doors and lids
Test and adjustment values for gap dimensions
Number
Designation
Model 209.4
BE60.00-P-1001-01G
Gap dimension
Engine hood to fender
Dimension "A"
mm
3 ( 1)
Engine hood to headlamp
Dimension "B"
mm
4 ( 0.5)
Engine hood to bumper
Dimension "C"
mm
5 ( 0.5)
See picture
AR60.00-P-0700-01QA
BE60.00-P-1002-01G
Gap dimension
Front door to A-pillar
Dimension "D"
mm
1
Front door to fender
Dimension "E"
mm
3.5 (-0.5/+1)
Front door to rear fender
Dimension "F"
mm
3.5 (-0.5/+1)
See picture
AR60.00-P-0700-01QA
BE60.00-P-1003-01G
Gap dimension
Trunk lid to rear fender, top
Dimension "G"
mm
3.5 ( 1)
Trunk lid to rear lamp unit
Dimension "H"
mm
3.5 ( 0.5/+1)
Trunk lid to bumper
Dimension "I"
mm
6.5 (+1)
Rear fender to rear lamp unit
Dimension "J"
mm
3 ( 1)
Trunk lid license plate panel to rear lamp unit
Dimension "K"
mm
2.5 ( 0.5)
See picture
AR60.00-P-0700-01QA
BE60.00-P-1004-01G
Gap dimension
Fuel filler flap
Dimension "L"
mm
3.2 (+0.5)
See picture
AR60.00-P-0700-01QA
BE60.00-P-1005-01G
Gap dimension
Front door window and
Dimension "Q"
mm
8 (+1)
Front door window and soft top
Dimension "R"
mm
-
See picture
AR60.00-P-0700-01QA
BE60.00-P-1006-01G
Gap dimension
Soft top to windshield frame
Dimension "M"
mm
10 ( 2)
Soft top to soft top compartment cover
Dimension "N"
mm
3 ( 0.5)
See picture
AR60.00-P-0700-01QA
BE60.00-P-1007-01G
Gap dimension
Soft top compartment cover/
Dimension "O"
mm
3 ( 0.5)
Soft top compartment cover to trunk lid
Dimension "P"
mm
4.5 ( 1)
See picture
AR60.00-P-0700-01QA
Adjust hoods, doors and lids as shown in drawing. The gap should not run wedge-shaped or be too narrow at points. Deviations from parallel gap should be max. 0.5 mm over the entire length. If the inside clearance is too large or too small, the movable body parts must be centered accordingly. The reference measurements apply only for repair work on bodies damaged in accidents.
