ar5465s0026p

Remove/install front PARKTRONIC sensor

Tip ar · temă 54.65 · versiune 0101 · 2020-06-16

Valabil pentru: Model 470, 471 with code EZ8 (PARKTRONIC Park Assist)

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 54 Instalaţie electrică, echipament şi instrumente › 54.65 Asistenţă parcare — Seria 470 · Seria 471

EinPAS 28 Sistem confort/Sistem de asistenţă şofer › 28.15 Asistent parcare › 28.15.12 Senzor/Comutator/Cablaj — Seria 470 · Seria 471

AR54.65-S-0026P

Remove/install front PARKTRONIC sensor

16.06.2020

Model

470, 471

with code EZ8 (PARKTRONIC Park Assist)

Remove/install front PARKTRONIC sensor

S54.65-4697-07

Shown on right outer PARKTRONIC sensor (1) on model 470

1

PARKTRONIC sensor

3

Bracket

4

Seal

2

Electrical connector

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1.1

Remove front bumper

When removing an inner PARKTRONIC sensor (1).

AR88.20-S-2000P

1.2

Release front fender liner in front area until the outer PARKTRONIC sensor (1) is accessible

When removing an outer PARKTRONIC sensor (1).

AR88.10-S-1301P

2

Unscrew bolt from bumper antenna and swivel bumper antenna out of working area

When removing left outer PARKTRONIC sensor (1).

AR82.62-S-8106P

3

Disconnect electrical connection (2)

4

Release catch hook in direction of arrow and pull PARKTRONIC sensor (1) rearwards out of the holder (3)

5

Check seal (4) for signs of damage and correct seating

If seal (4) is damaged.

Install new seal (4).

If the seal (4) is not correctly seated on the PARKTRONIC sensor (1).

Correctly position seal (4).

6

Install in the reverse order

Check

7

Perform function check for PARKTRONIC

Documente menționate