S88.20-4579-09
1 | Bumper | 3 | Expansion rivet | |
2 | Radiator trim | 4 | Expansion rivet |
S88.20-4580-09
1 | Bumper | 6 | Bolts | |
5 | Bolts | 7 | Bolts |
S88.20-4581-09
Shown with code L16 (Front fog lamp, halogen) |
1 | Bumper | 9 | Fender liner | |
8 | Expansion rivet | 10 | Bolts |
S88.20-4582-09
Shown with code LG7 (LED High Performance headlamp), with code EZ8 (PARKTRONIC) and with code JS1 (360° Camera) |
1 | Bumper | 12 | Hose |
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
2 | Remove cover from radiator grille (2) | ||
3 | Remove expansion rivets (3) | Installation: Check expansion rivets (3) for damage. | |
Depending on findings | |||
| |||
Replace damaged expansion rivets (3). | |||
4 | Remove expansion rivet (4) | Installation: Check expansion rivets (4) for damage. | |
Depending on findings | |||
| |||
Replace damaged expansion rivets (4). | |||
5 | Remove lower paneling on bumper (1) | ||
6 | Remove bolt/bolts (5) | ||
7 | Remove bolts (6) | ||
8 | Remove bolts (7) | ||
9 | Remove expansion rivets (8) | Installation: Check expansion rivets (8) for damage. | |
Depending on findings | |||
| |||
Replace damaged expansion rivets (8). | |||
10 | Loosen both fender liners (9) | ||
11 | Remove screw/bolts (10) | ||
12 | Separate hose (12) for headlamp cleaning system at connecting point | Model 470, 471 | |
13 | Disconnect electrical connectors | ||
14 | Unclip bumper (1) (arrows) and remove | Helper required. | |
15 | Install in the reverse order | ||
| Check | ||
16 | Perform function check for PARKTRONIC | Model 470, 471 | |
17 | Adjust the front fog lamp |
| |
18 | Check headlamp cleaning system for proper function | Model 470, 471 | |
Calibrate | |||
19 | Calibrate front 360° camera using the diagnostic system | ||
| Model 470, 471 |