Removing and installing complete exhaust system · ar4910p7000c · Mercedes-Benz WIS

AR49.10-P-7000C

Removing and installing complete exhaust system

5.9.95

ENGINE 602.982 in MODEL 210.017

ENGINE 606.962 in MODEL 210.025

P49.10-2013-09

Modification notes

5.11.96	Engine 606.962, flange connection of front exhaust pipe included for the first time		AR49.10-P-7000C
15.2.98	Disk spring element at front catalytic converter and additional supporting panel at rear muffler		AR49.10-P-7000C

Fig. item, etc.	Work instructions
	Flange connection of turbocharger or front exhaust pipe, respectively
			*BA09.40-P-1001-01A
	Flange connection of front exhaust pipe or exhaust pipe with TWC	 Removal: Use pipe pliers to press together disk springs (a, b) and press off metal tongue with screwdriver.  Installation: Use pipe pliers to press together disk springs (a, b) until metal tongue locks in place.
	Exhaust system modified, disk spring element fitted to front catalytic converter and additional supporting panel to rear muffler	Engine 602.982 in model 210	BT49.10-P-0002-01A
8/2	Nuts of exhaust bracket to threaded plate of front exhaust pipe	replace
			*BA49.10-P-1001-01B
107/2	Tensioning clip
			*BA09.40-P-1003-01A
	Hooked wrench for rubber bush		*WH58.30-Z-1001-19A

 Turbocharger

Number	Designation		Engine 602.982	Engine 606.961/ 962


BA09.40-P-1001-01A	Bolt of flange connection of turbocharger / front exhaust pipe	Nm	20	–
BA09.40-P-1003-01A	Tensioning clip of turbocharger / front exhaust pipe	Nm	–	25

 Exhaust system

Number	Designation		Engine 602.982	Engine 604, 605, 606 except 606.964


BA49.10-P-1001-01B	Nut of exhaust bracket to threaded plate of front exhaust pipe	Nm	20	20

Commercially available tools

Number

Designation

WH58.30-Z-1001-19A

Hook wrench,

Firma Hazet