ar4910p0001mfd

Remove/install heat shield for firewall

Tip ar · temă 49.10 · versiune 0201 · 2020-03-02

Valabil pentru: Model 118, 177, 247 with engine 282

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 49 Instalaţie gaze arse, purificare gaze arse › 49.10 Ţeavă de eşapament, catalizator, amortizor de zgomot — Seria 118 · Seria 177 · Seria 247

EinPAS 35 Caroserie/Şasiu/Piese detaşabile › 35.25 Element amortizare/Capitonaj jos/Etanșare/Protecție sub autovehicul › 35.25.40 Strat izolator/Ecranare/Covor antifonic — Seria 118 · Seria 177 · Seria 247

Valabil și pentru motoare/cutii de viteze: 282 ***

AR49.10-P-0001MFD

Remove/install heat shield for firewall

21.02.2020

Model

118, 177, 247 with engine 282

Modification notes

09.01.2020

Document completely revised.

Remove/install heat shield for firewall

P49.10-3285-09

Shown on model 177 with engine 282 except code ME08 (hybrid drive 75 – 84 KW VARIANT (INCLUDING PLUGIN))

1

Heat shield

4

Screw

2

Heat shield

5

Nuts

3

Nuts

Remove/install heat shield for firewall

P49.10-A047-09

Shown on model 177 with engine 282 with code ME08 (Hybrid drive 75-84 KW VARIANT (INCLUDING PLUG-IN))

1

Heat shield

3

Nuts

Remove/install heat shield for firewall

P49.10-A048-09

Shown on model 177 with engine 282 with code ME08 (Hybrid drive 75-84 KW VARIANT (INCLUDING PLUG-IN))

1

Heat shield

2

Heat shield

5

Nuts

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.Model 118, 177, 247 with engine 282
with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))

AS00.00-Z-0035-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

Model 118, 177, 247 with engine 282
with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))

AH00.00-Z-0300-01A

Remove/install

1

Remove voltage of high-voltage on-board electrical system.

Model 118, 177, 247 with engine 282
with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))

AR47.70-P-1000MFH

2

Remove bottom engine compartment paneling.

AR61.20-P-1105MFA

3

Release side underfloor panelings on left and right in front area until nuts (3) can be accessed.

AR61.30-P-1001MFA

4

Remove nuts (3) and release heat shield (1).

5

Disconnect inerting system line in the engine compartment.

Model 118, 177, 247 with engine 282
with code 2U8 (Alternative refrigerant)

AR86.10-P-0119MFD

6.1

Remove on-board electrical system battery (G1) and side wall.

Model 118, 177, 247 with engine 282
except code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))

AR54.10-P-0028MFA

6.2

Remove the coolant expansion reservoir.

Model 118, 177, 247 with engine 282
with code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))

AR08.50-P-2478MFH

7

Unscrew bolt (4).

Model 118, 177, 247 with engine 282
except code ME08 (Hybrid drive 75-84 kW VARIANT (INCLUDING PLUGIN))

8

Remove nuts (5).

9

Remove heat shield (2).

10

Install in the reverse order.

Documente menționate