Jacket tube
Number | Designation | Model | ||
BA46.10-P-1010-03N | Height adjustment motor gear mechanism to jacket tube | 1st stage | Nm | 8 |
2nd stage | Nm | 3 | ||
Assembly note | See | |||
BA46.10-P-1011-03N | Bearing bracket to jacket tube | 1st stage | Nm | 8 |
2nd stage | Nm | 3 | ||
Assembly note | See | |||
BA46.10-P-1012-03N | Bolt on clamping nut | Nm | 6 | |
P46.10-2497-04
87 Bearing bracket
87d, 87f Bolts
87e, 87g Clamping nuts
M20/1x1 Steering column in/out motor connector
Detach
1 Unclip steering column in/out motor electrical connector (M20/1x1) from bearing bracket (87).
2 Slacken bolts on clamping nuts (87e, 87g) and unscrew clamping nuts (87e, 87g).
3 Remove bolts (87d, 87f) with pilot bushings.
4 Remove bearing bracket (87).
Attach
5 Fit bearing bracket (87).
6 Insert bolts (87d, 87f) with pilot bushings.
7 Screw on nuts (87e, 87g) and fit bolts on clamping nuts (87e, 87g).
The smooth surfaces of the clamping nuts (87e, 87g) must point outwards.
8 Tighten bolts (87d, 87f) , slacken and retighten .
9 Tighten bolts on clamping nuts (87e, 87g) .
10 Clip in steering column motor electrical connector (M20/1x1)