ar4305p0001mrm

Remove/install electric vacuum pump

Tip ar · temă 43.05 · versiune 0100 · 2020-03-20

Valabil pentru: Model 167 with engine 274.9

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 43 Sistem pneumatic frâne şi frână suplimentară › 43.05 Pompă de vacuum — Seria 167

EinPAS 21 Frâne/instalație vacuum/instalație de aer comprimat › 21.15 Frână de serviciu/instalație vacuum › 21.15.50 Pompă de vacuum/Rezervor de aer comprimat — Seria 167

Valabil și pentru motoare/cutii de viteze: 274 9**

AR43.05-P-0001MRM

Remove/install electric vacuum pump

04.03.2020

Model

167 with engine 274.9

Remove/install electric vacuum pump

P43.05-A019-78

1

Electrical connector

3

Vacuum line

M56

Electric vacuum pump

2

Bolts

Danger

Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC)

Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines.

AS00.00-Z-0035-01A

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Caution

Risk of injury caused by scraping or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.

AS00.00-Z-0017-01A

Topical note

General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment

AH00.00-Z-0300-01A

Topical note

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Remove/install

1

Remove voltage of high-voltage on-board electrical system.

AR47.70-P-1000MEH

2

Reduce vacuum in brake booster by depressing brake pedal several times.

3

Remove upper engine cover.

AP01.10-P-2405-01O

4

Remove engine air intake duct upstream of air filter.

5

Release electrical connector(1) and disconnect.

6

Remove bolts (2) .

Screw/bolt, bracket for electrical vacuum pump to timing case/crankcase

*BA43.05-P-1006-01K

7

Release vacuum line (3) at electric vacuum pump (M56) and detach.

8

Remove electric vacuum pump (M56) together with bracket.

The electric vacuum pump (M56) is only available as a replacement part together with the holder.

9

Install in the reverse order.

10

Reset runtime of electric vacuum pump (M56) using diagnostic system.

If the electric vacuum pump (M56) was replaced.

AD00.00-P-2000-06ME

11

Perform brake test on test stand.

AP42.00-P-4290BA

Vacuum pump

Number

Designation

Models 167, 172, 204, 205, 207, 212, 213, 218, 238, 253 with engine 274

BA43.05-P-1006-01K

Screw/bolt, bracket for electrical vacuum pump to timing case/crankcase

Nm

20

Documente menționate