ar4110p005013da

Tighten bolts of propeller shaft center support bearing

Tip ar · temă 41.10 · versiune 0107 · 2010-01-20

Valabil pentru: MODEL 140

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 41 Arbore cardanic › 41.10 Arbore cardanic — Seria 140

EinPAS 17 Grup motopropulsor/Punte › 17.40 Arbore cardanic › 17.40.30 Arbore cardanic dispozitiv de antrenare/tracţiune integrală — Seria 140

AR41.10-P-0050-13DA

Tighten bolts of propeller shaft center support bearing

Propeller shaft center support bearing

Number

Designation

Model 140

BA41.40-P-1001-01A

Bolt, propeller shaft center support bearing to frame floor assembly

Self-tapping screw

Nm

-

Bolt with washer

Nm

25

Bolt with collar and self-centering tip

Nm

30

Bolt with collar and without self-centering tip

Nm

-

Tighten bolts of propeller shaft center support bearing

Only tighten bolts after fastening the flexible couplings on the transmission and on rear axle

When the rear axle is not loaded, before tightening the hexagon head bolts, push the propeller shaft center support bearing 5 mm forwards (arrows) from the current installation and then tighten the hexagon head bolts.

P41.10-0031-03