ar3530s011601e
Detach, attach and secure hexagon collar nut of rear axle shaft
Tip ar · temă 35.30 · versiune 0200 · 2020-01-28
Valabil pentru: Model 447 with engine 274, 651 Model 447 with engine 654.9 Model 448 with engine 274
Nu este disponibil în „ro”; afișat în Engleză.
Încadrare
Grupă funcțională 2 Sistem de rulare › 35 Punte spate › 35.30 Impuls, arbore de antrenare — Seria 447 · Seria 448 · Seria 651 · Seria 654 (modele 9**)
EinPAS 17 Grup motopropulsor/Punte › 17.51 Punte spate › 17.51.51 Arbore punte/Arbore de antrenare — Seria 447 · Seria 448 · Seria 651 · Seria 654 (modele 9**)
Valabil și pentru motoare/cutii de viteze: 274 ***
AR35.30-S-0116-01E
| Detach, attach and secure hexagon collar nut of rear axle shaft
|
|
|
Topical note
| Notes on threaded connections fastened using a tightening angle-based tightening process
|
| AH00.00-P-0020-01A
|
Model
| 447 with engine 274, 651
|
Model
| 447 with engine 654.9
|
Model
| 448 with engine 274
|
27.01.2020
| Collar nut, rear axle shaft to wheel hub
|
| BA35.30-N-1001-01E
|
Number
| Designation
|
|
| Model 447, 448
|
BA35.30-N-1001-01E
| Collar nut, rear axle shaft to wheel hub
| Stage 1
| Nm
| 250
|
|
|
| Loosen
| °
| 180
|
|
|
| Stage 2
| Nm
| 200
|
|
|
| Stage 3
| °
| 30
|
Remove
1
| Bend up lock tabs (arrows) and unscrew collared nut (1).
|
|
| The vehicle may not be moved on its wheels when the collar nuts (1) are unfastened.
Otherwise the wheel bearings may be damaged.
|
Install
2
| Screw on collar nut (1) .
|
|
| Always replace collar nut (1).
Otherwise the collar nut (1) cannot be properly secured.
|
Lock
3
| Press collar (3), as shown, into notches of rear axle shaft (4).
|
|
| There may not be any gap left between the notches and the lock tabs.
|
4
| Paint match marks on the locked collar nut (1) and the rear axle shaft (4).
|
Documente menționate
- ah0000p002001a Indicaţii referitoare la îmbinările filetate, care au fost realizate conform
procedeului de strângere în funcţie de unghiul de rotire
