Grupă funcțională 2 Sistem de rulare › 35 Punte spate › 35.30 Impuls, arbore de antrenare — Seria 905
EinPAS 17 Grup motopropulsor/Punte › 17.51 Punte spate › 17.51.65 Diferențial spate/ax transmisie principală — Seria 905
Valabil și pentru motoare/cutii de viteze: 741 980
AR35.30-D-4670-03C
Install joint flange at drive pinion
Model
905 with rear axle 741.980
Test and adjustment values for rear axle drive
Number
Designation
Rear axle 741.980
BE35.30-N-1001-01B
Friction torque of drive pinion bearing
with radial shaft sealing ring
Nm
1,7...3,38
without radial shaft sealing ring
Nm
1,65...3,74
001 589 49 21 00
Torque meter
717 589 00 31 00
Retainer wrench
Repair materials
Number
Designation
Order number
BR00.45-Z-1039-04A
Rapid cleaner 7061
Henkel AG & Co. KGaA http://www.loctite.de
BR00.45-Z-1045-01A
Loctite sealant 565
A 004 989 18 20
1
Spray splines in coupling flange and on pinion and wipe with a clean rag.
2
Coat splines in coupling flange with sealant and fit onto drive pinion.
3
Attach retainer wrench (01) to joint flange.
D35.25-1101-01
4
Screw on new collar nut and tighten carefully in stages until the specified total friction moment is obtained. Check total friction moment after each retightening operation using torque meter (02).
To check, detach the retainer wrench (01) from the joint flange.
D35.25-1102-01
Never correct total friction coefficient by slackening collar nut.
Do not tighten the collar nut too much. Otherwise the inner compression ring will be squeezed together and damaged.
