ar2010d2461tsf

Remove/install coolant thermostat

Tip ar · temă 20.10 · versiune 0200 · 2019-08-16

Valabil pentru: Engine 651 in model 910

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 20 Răcire motor › 20.10 Pompă lichid răcire, termostat lichid de răcire — Seria 651 · Seria 910

EinPAS 15 Motor › 15.25 Sistem răcire motor › 15.25.30 Pompă/Termostat/Dispozitiv de preîncălzire — Seria 651 · Seria 910

AR20.10-D-2461TSF

Remove/install coolant thermostat

01.08.2019

Engine

651 in model 910

Modification notes

31.07.2019

Work procedure updated

The whole document

Remove/install coolant thermostat

1

Coolant thermostat

2

Bolts

3

Seal

4

Coolant pump

D20.10-A002-76

Warning

Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant.

Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers.
Wear protective gloves, protective clothing and safety glasses.

AS20.00-Z-0001-01A

Topical note

Notes on avoiding damage through contamination and foreign objects

AH00.00-P-5000-01A

Remove/install

1

Remove coolant pump (4).

AR20.10-D-1271TSF

2

Remove coolant thermostat (1) from coolant pump (4).

To do this, remove screws (2). The coolant thermostat (1) and coolant thermostat housing form a unit.

Installation: Replace seal (3).

Screw, coolant thermostat housing to coolant pump

*BA20.10-N-1005-01TSF

3

Install in the reverse order.

Coolant pump, coolant thermostat, connection fitting

Number

Designation

Engine 651 in model 910

BA20.10-N-1005-01TSF

Screw, coolant thermostat housing to coolant pump

Nm

8

Documente menționate