1 | Cap |
2 | Radiator |
P20.00-2373-11
Warning | Risk of injury to skin and eyes suffering scalding from contact with hot coolantspray. Risk of poisoning from swallowing coolant. | Do not open cooling system unless coolant temperature is below 90 °C. Open cap slowly and release the pressure. Do not pour coolant into beverage containers. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | Notes on coolant | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Check | ||
1 | Remove interior flap above engine | ||
2 | Turn cooling system cap (1) on expansion reservoir (2) a half turn counterclockwise, relieve the overpressure and then unscrew the cooling system cap (1) | ||
3 | Check coolant level in cooler (2), correct if necessary | ||
| Coolant specifications | ||
| Anticorrosion/antifreeze agents (Sheet 325.0) | ||
Fill cooling system up to the upper edge of the cooler (2). | |||
4 | Attach pressure pump to cooler (2) | Pressure pump | |
5 | Apply a pressure of a max. 1.6 bar to the cooling system | ||
6 | Observe pressure gauge on pressure pump for pressure drop in cooling system | ||
7 | Check all components of cooling system for leaktightness and establish coolant loss | Remove cause of the coolant loss if necessary; then repeat the check. | |
8 | Remove pressure in the cooling system on the pressure pump | ||
9 | Attach pressure pump to cooler (2) | Pressure pump | |
10 | Seal cooler (2) with cap (1) | ||
11 | Install interior flap above engine |
450 589 07 21 00
Pressure pump
Documente menționate
- ah2000n208001a Indicaţii pentru lichid de răcire
- ah5400p000101a Indicaţii pentru evitarea defectării componentelor electronice prin descărcare electrostatică
- ar8840p110003mcc
- as0000z003501a Pericol de moarte în cadrul lucrărilor la componentele şi sistemele cu U >= 30 V tensiune alternativă (CA) respectiv cu U >= 60 V tensiune continuă (CC)
- as2000z000101a Pericol de rănire la piele şi ochi prin opărire cu lichid de răcire fierbinte pulverizat afară. Pericol de otrăvire datorită înghiţirii lichid de răcire.
- bb0040p031001a Prescripţii lichid de răcire
- bb0040p032500a Agent anticoroziv/antigel (specificaţie 325.0)