ar1540t5032caa

Remove and install alternator

Tip ar · temă 15.40 · versiune 0101 · 2012-02-22

Valabil pentru: ENGINE 457.941 in MODEL 613.368 Alternator II

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 15 Instalaţie electrică motor › 15.40 Alternator — Seria 613 (modele 368)

EinPAS 25 Rețea de bord/Rețea/Multi-funcție › 25.20 Reţea de bord › 25.20.30 Alternator — Seria 613 (modele 368)

Valabil și pentru motoare/cutii de viteze: 457 941

AR15.40-T-5032CAA

Remove and install alternator

14.2.12

ENGINE 457.941 in MODEL 613.368
Alternator II

Remove and install alternator

T15.40-0018-01

1 Alternator

2 Screw, nut

Remove/install

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect electric cables at battery.

AR54.18-T-0002CA

2

Open the maintenance flap at the tail

3

Remove the V-belt of the alternator

Detach the tensioning device (arrow).

AR13.21-T-0140CAA

4

Detach the cooling air hose at the back of the alternator (1)

5

Remove the electric cables from the alternator (1)

Remove the cover at the back of the alternator.

6

Remove the screws and nuts (2) and take out the alternator (1)

7

Install in the reverse order

Documente menționate