2 | Bolts |
T1/1 | Cylinder 1 ignition coil |
T1/2 | Cylinder 2 ignition coil |
T1/3 | Cylinder 3 ignition coil |
T1/4 | Cylinder 4 ignition coil |
T1/5 | Cylinder 5 ignition coil |
T1/6 | Cylinder 6 ignition coil |
P15.10-2601-11
3 | Spark plug connector |
P15.10-2602-11
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove/install | ||
1 | Switch off ignition and store transmitter key outside of transmission range (min. 2 m) | ||
2 | Remove engine air intake duct downstream of air filter | ||
Installation: Do not install the upper engine cover until an engine test run has been performed. | |||
3 | Remove front noise insulation | ||
4 | Remove bleed line at oil separator and seal openings with suitable stop plugs | Installation: Replace O-rings. | |
Record plug | |||
5 | Remove rear noise insulation | ||
6 | Release and disconnect electrical connectors of ignition coils (T1/1 up to T1/6) | ||
7 | Remove screw/bolts (2) | Screw/bolt, ignition coil to cylinder head cover | |
8 | Detach ignition coils (T1/1 up to T1/6) with spark plug connectors (3) upwards and remove | Installation: | |
Installation: Approx. Fill 1 g of spark plug connector grease into the spark plug connectors. | |||
Spark plug connector grease | |||
9 | Check ignition coils (T1/1 up to T1/6) for external damage and replace if necessary | ||
10 | Install in the reverse order | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
11 | Perform an engine test run and check engine for proper function | ||
12 | Install upper engine cover |
129 589 00 91 00
Record plug
Documente menționate
- ah0000p500001a Indicaţii pentru evitarea defecţiunilor din cauza impurităţilor şi corpurilor străine
- ah5400p000101a Indicaţii pentru evitarea defectării componentelor electronice prin descărcare electrostatică
- ar0110p2405msa
- ar0910p8130msa
- as0000z000201a Pericol de rănire la piele şi ochi prin manipulare cu obiecte fierbinţi sau incandescente
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as0000z003501a Pericol de moarte în cadrul lucrărilor la componentele şi sistemele cu U >= 30 V tensiune alternativă (CA) respectiv cu U >= 60 V tensiune continuă (CC)