ar1512p0001mt

Remove install crankshaft pulse ring

Tip ar · temă 15.12 · versiune 0109 · 2020-03-12

Valabil pentru: Engine 133 in model 117, 156, 176 Engine 270 in model 117, 156, 176, 242, 246.2

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 15 Instalaţie electrică motor › 15.12 Instalaţie de aprindere EZL — Seria 117 · Seria 156 · Seria 176 · Seria 242 · Seria 246 (modele 2**)

EinPAS 15 Motor › 15.45 Management motor › 15.45.12 Senzor/Comutator/Cablaj — Seria 117 · Seria 156 · Seria 176 · Seria 242 · Seria 246 (modele 2**)

Valabil și pentru motoare/cutii de viteze: 133 ***, 270 ***

AR15.12-P-0001MT

Remove install crankshaft pulse ring

06.03.2020

Engine

133 in model 117, 156, 176

Engine

270 in model 117, 156, 176, 242, 246.2

Remove install crankshaft pulse ring

1

Flywheel / drive plate

1a

Screw

2

Pulse ring

3

Crankcase

4

Oil pan

5

End cover

5a

Screw

6

Radial shaft sealing ring

P03.20-2342-06

Remove/install

1

Remove flywheel/driven plate (1)

AR03.30-P-8001NKB

2

Remove crankshaft Hall sensor


Engine 133 in model 117, 156, 176

AR15.12-P-2136MTA

Engine 270 in model 117, 156, 176, 242, 246.2

AR15.12-P-2136MT

3

Remove pulse ring (2)


Pry off pulse ring (2) carefully. Do not use sharp-edged tools. The rubber lining of the pulse ring (2) must not get damaged.
The function of the pulse ring (2) will be impaired otherwise.


The contact surfaces of the pulse ring (2) and the crankshaft flange must be absolutely clean and free of corrosion. Clean if necessary. Do not use sharp-edged tools or coarse abrasive cloth.
The surfaces are destroyed otherwise and the crankshaft or the pulse ring (2) will be unusable.


The pulse ring (2) must not come into contact with external magnetic fields.
The pulse ring (2) can be damaged otherwise.

Installation: The cylinder pin for the crankshaft determines the installation position of the pulse ring (2).

Clean

4

Clean crankcase (3) and oil pan (4) in area of the end cover (5)

Assembly cleaner

*BR00.45-Z-1028-04A

5

Install in the reverse order

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

6

Carry out an engine test run and check engine for leak tightness

Repair materials

Number

Designation

Order number

BR00.45-Z-1028-04A

Assembly cleaner

A 000 986 56 01

Documente menționate