ar1322p1202mrd

Remove/install poly-V belt

Tip ar · temă 13.22 · versiune 0103 · 2017-07-14

Valabil pentru: Engine 274.9 in model 213 (except 213.050) Engine 274.9 in model 238

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 13 Compresor aer, transmisie prin curea › 13.22 Acţionare cu o curea — Seria 213 (modele 004, 005, 008, 011, 012, 013, 016, 019, 020, 021, 022, 023, 033, 034, 040, 042, 043, 045, 048, 049, 053, 054, 059, 061, 064, 066, 068, 071, 073, 076, 077, 078, 080, 083, 084, 085, 086, 087, 088, 089, 104, 122, 131, 140, 142, 143, 148, 153, 155, 163, 177, 178, 180, 183, 186, 187, 204, 205, 208, 211, 212, 213, 216, 217, 219, 220, 222, 223, 227, 233, 234, 237, 242, 243, 245, 253, 259, 260, 261, 264, 266, 268, 271, 277, 278, 279, 280, 283, 287, 288, 289) · Seria 238

EinPAS 15 Motor › 15.18 Antrenare curea › 15.18.30 Curea/Fulie de curea/Dispozitiv de întindere/Rolă de ghidare — Seria 213 (modele 004, 005, 008, 011, 012, 013, 016, 019, 020, 021, 022, 023, 033, 034, 040, 042, 043, 045, 048, 049, 053, 054, 059, 061, 064, 066, 068, 071, 073, 076, 077, 078, 080, 083, 084, 085, 086, 087, 088, 089, 104, 122, 131, 140, 142, 143, 148, 153, 155, 163, 177, 178, 180, 183, 186, 187, 204, 205, 208, 211, 212, 213, 216, 217, 219, 220, 222, 223, 227, 233, 234, 237, 242, 243, 245, 253, 259, 260, 261, 264, 266, 268, 271, 277, 278, 279, 280, 283, 287, 288, 289) · Seria 238

Valabil și pentru motoare/cutii de viteze: 274 9**

AR13.22-P-1202MRD

Remove/install poly-V belt

24.05.2017

Engine

274.9 in model 213 (except 213.050)

Engine

274.9 in model 238

Remove/install poly-V belt

1

Poly-V-belt

3

Multi-tooth pin

4

Tensioning device

P13.20-2113-06

Warning

Risk of injury. Skin or eye injuries may result when handling hot or glowing objects.

Wear protective gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

Warning

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of mechanical components when moving components.

AS00.00-Z-0009-01A

Remove

1

Remove upper engine cover

2

Remove engine air intake duct upstream of air filter

3

Turn clamping device (4) on multi-tooth pin (3) counterclockwise and lock with a suitable drift

4

Remove the poly-V belt (1)

Install

5

Check the poly-V belt (1) for damage and replace if necessary

AP13.22-P-1351-01A

6

Check clamping device (4) for damage and replace if necessary

AR13.25-P-3220MRD

7

Check guide pulley for damage and replace if necessary

Engine 274.9 in model 213.048/049/148
Engine 274.9 in model 238.348/448

Bolt, guide pulley to alternator

*BA13.25-P-1004-01Z

8

Check vibration damper for damage and replace if necessary

AR03.30-P-1800MRD

9

Check belt pulley for alternator for damage and replace if necessary

AR15.40-P-5710MRD

10

Check belt pulley for A/C compressor for damage and replace if necessary


Engine 274.9 in model 238

AR83.55-P-5310LWK

Engine 274.9 in model 213 (except 213.050)
except code ME06 (Hybrid drive 60 kW variant (incl. plugin))

AR83.55-P-5310LW

11

Fit on poly-V belt (1)

Routing diagram for poly-V belt

AR13.22-P-3902-02MRD


Do not use belt wax or similar products.
This leads to slipping of the poly-V belt (1).

12

Pull out drift (1) and tension poly-V belt with clamping device (4)

13

Push back clamping device (4) onto multi-tooth pin (3) clockwise using a torque

Pretension for poly-V belts on multi-tooth clamping device

*BA13.25-P-1005-01Z

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

14

Perform an engine test run and check engine for proper function

15

Install engine air intake duct upstream of air filter

16

Install upper engine cover

Belt tensioning device

Number

Designation

Engine 274

BA13.25-P-1004-01Z

Bolt, guide pulley to alternator

Nm

20

Belt tensioning device

Number

Designation

Engine 274

BA13.25-P-1005-01Z

Pretension for poly-V belts on multi-tooth clamping device

Nm

55

Documente menționate