1 | Poly-V-belt |
2 | Tensioning device |
3 | Serration |
4 | Holes |
S13.22-4515-06
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| Remove/install | ||
1 | Remove lower engine compartment paneling | If installed. | |
2 | Turn clamping device (2) on serration (3) counterclockwise (arrow) and slacken poly-V-belt (1). | Installation: | |
Pretension for poly-V belts on multi-tooth clamping device | |||
3 | Bring bores (4) to cover and engage clamping device (2) with pin. | ||
| Pin for locking poly-V belt tensioning device | ||
4 | Remove poly-V-belt (1). | Installation: | |
Relieve the clamping device (2) for any further work. | |||
Installation: Observe routing diagram of poly-V belt (1). | |||
| Check | ||
5 | Check belt pulley profiles, guide pulleys, and clamping device (2) for damage and contamination. | If damage to a component part is detected, | |
| |||
Replace defective component. | |||
6 | Install in the reverse order. | ||
| Check | ||
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
7 | Perform engine test run. While doing so, check engine for proper operation and leak tightness. |
Documente menționate
- ar6120d1105ts
- as0000z000201a Pericol de rănire la piele şi ochi prin manipulare cu obiecte fierbinţi sau incandescente
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as0000z000901a Pericol de rănire prin prinderea sau strivirea, în caz extrem prin tăierea membrelor în timpul manipulării sistemului mecanic
- as0000z001001a Pericol de moarte prin alunecare sau basculare a autovehiculului de pe elevator
- as0000z001701a Pericol de rănire prin tăieturi respectiv zgârieturi provocate de componentele cu muchii ascuţite ale autovehiculului
- as4900z000101a Pericol de ardere, asfixiere şi de intoxicare în cadrul lucrărilor la instalaţia de gaze arse şi la componentele aferente. Pericol de asfixiere şi pericol de intoxicare prin inhalare de componente gazoase şi solide ale gazelor arse.
- wf5850s132502s Ştift pentru blocarea dispozitivului de întindere curea cu nervuri trapezoidale