W09.41-0001-06
1 Charge air pipe
2 Bolt
3 Nut
4 Bolt
5 Solenoid valve (only with code (M89) flame starting system FLA)
6 Charge air hose (red)
7 Nut
8 Flame glow plug (only with code (M89) flame starting system FLA)
9 O-ring
10 Clip
11 Coolant line
| Remove/Install | ||
Danger! | Risk of injury caused by being caught or pinched as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut. | |
1 | Tilt cab | ||
| Notes on tilting the cab | ||
2 | Remove red charge air hose (6) | The red charge air hose (6) is temperature-resistant and must always be installed between charge air pipe and charge air cooler . | |
3 | Remove charge air pipe (1) at charge air manifold | ||
Danger! | Risk of explosion caused by ignition of flammable products, risk of poisoning caused by inhaling fuel vapors or swallowing fuel as well as risk of injury to skin and eyes exposed to fuel. | No fire, sparks, open flames or smoking. Wear protective clothing when handling fuel. | |
4 | Detach solenoid valve (5) with bracket | Only with code (M89) flame starting system (FLA) | |
Collect escaping fuel. | |||
5 | Detach coolant line (11) at charge air pipe (1) | Do not remove coolant line (11). | |
6 | Remove charge air pipe (1) | Seal holes at turbocharger. | |
Installation: Install new O-ring (9). | |||
7 | Install in the reverse order |
Documente menționate
- ah6080n000301a Indicaţii pentru rabatarea cabinei şoferului
- as4700z000101a Pericol de explozie prin aprindere, pericol de intoxicare prin inhalare şi înghiţire de carburant cât şi pericol de rănire prin contactul pielii şi ochilor cu carburantul
- as6080z000101a Pericol de rănire prin prinderea şi strivirea la basculare cabină şofer