Shown on ENGINE 274.910 in MODEL 213 |
2 | Subharness |
3 | Clip |
4 | Air intake pipe |
5 | Clip |
P09.10-2310-06
Warning | Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | |
Warning | Risk of injury due to fan starting unexpectedly | Do not reach into the rotation or hazard area of the fan. Wear closed and close-fitting work clothes. | |
Caution | Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on avoiding damage through contamination and foreign objects | ||
| Remove | ||
1 | Remove upper engine cover | ||
2 | Remove engine air intake duct upstream of air filter | ||
3 | Detach partial load throttle bleed line from air intake pipe (4) | ||
4 | Release and disconnect electrical connection for wide open throttle vent line heater element | ||
5.1 | Detach wide open throttle vent line from wide open throttle vent line heater element | Engine 274.9 in model 213 | |
5.2 | Remove wide open throttle bleed line with oil separator | Engine 274.9 in model 213 | |
The wide open throttle vent line, the oil separator and the air intake pipe (4) are firmly connected together and can only be removed together. | |||
6 | Unclip subharness (2) at air intake pipe (4) | ||
7 | Release clamps (3, 5) and detach air intake pipe (4) | ||
8 | Remove compensation ring between air intake pipe (4) and exhaust gas turbocharger from exhaust gas turbocharger | ||
| Install | ||
9 | Install new compensating ring in the fitting of the air intake pipe (4) and wet with lubricant | Lubricant | |
10 | Position air intake pipe (4) | ||
11 | Tighten clamps (3, 5) | ||
12 | Clip subharness (2) into air intake pipe (4) | ||
13.1 | Push wide open throttle vent line onto wide open throttle vent line heater element | Engine 274.9 in model 213 | |
13.2 | Install wide open throttle bleed line with oil separator | Engine 274.9 in model 213 | |
14 | Connect electrical connector of wide-open-throttle bleed line heating element | ||
15 | Push partial load vent line onto air intake pipe (4) | ||
16 | Install engine air intake duct upstream of air filter | ||
Warning | Risk of burn injuries, suffocation and poisoning when working on the exhaust system and the components connected to it. Risk of suffocation and risk of poisoning caused by inhalation of gaseous and solid components of the exhaust. Risk of poisoning caused by skin contact with solid components of the exhaust. | Wear protective clothing and safety glasses. Use the extraction system. Move people out of the hazard area. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
17 | Perform an engine test run and check engine for proper operation and leaktightness | ||
18 | Install upper engine cover |
Documente menționate
- ah0000p500001a Indicaţii pentru evitarea defecţiunilor din cauza impurităţilor şi corpurilor străine
- ah5400p000101a Indicaţii pentru evitarea defectării componentelor electronice prin descărcare electrostatică
- ar0120p0002mrx Înlocuire aerisire bloc motor la sarcină totală
- ar0120p0020mrd
- as0000z000201a Pericol de rănire la piele şi ochi prin manipulare cu obiecte fierbinţi sau incandescente
- as0000z000501a Pericol de accident prin pornirea de pe loc cu motorul aflat în funcţionare. Pericol de rănire prin striviri şi arsuri la manipularea în timpul pornirii motorului sau cu motorul aflat în funcţionare
- as0000z001701a Pericol de rănire prin tăieturi respectiv zgârieturi provocate de componentele cu muchii ascuţite ale autovehiculului
- as2040z000101a Pericol de rănire prin pornirea bruscă a ventilatorului
- as4900z000101a Pericol de ardere, asfixiere şi de intoxicare în cadrul lucrărilor la instalaţia de gaze arse şi la componentele aferente. Pericol de asfixiere şi pericol de intoxicare prin inhalare de componente gazoase şi solide ale gazelor arse.