1 | Pressure line |
2 | Leak oil line |
3 | Fuel return line |
4 | Bracket |
5 | Bolts |
6 | High pressure pump |
7 | Rail |
Y76/2 | Cylinder 2 fuel injector |
Y76/3 | Cylinder 3 fuel injector |
P07.03-2227-11
| Remove/install | ||
Danger | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
Notes about Common-Rail components | |||
1 | Lower rear drive module | ||
2 | Lower vehicle with vehicle lift | ||
3 | Remove injection line of the fuel injector for cylinder 2 (Y76/2) | ||
Installation: Check pressure line (1) after the engine test run for leak tightness. | |||
4 | Disconnect electrical connector from the fuel injector for cylinder 3 (Y76/3) | ||
5 | Expose leak oil line (2) and fuel return line (3) on the bracket (4) | ||
6 | Remove screws/bolts (5) and remove bracket (4) | ||
7 | Unscrew union nuts of the pressure line (1) from the high-pressure pump (6) and from the rail (7) | Pressure line union nut to high-pressure pump | |
Union nut, pressure line to rail | |||
8 | Guide out pressure line (1) and remove | ||
9 | Remove retaining clamp from the pressure line (1) | When installing a new pressure line (1). | |
10 | Install in the reverse order |
Documente menționate
- ah0716p000201tx Indicaţii componente Common-Rail
- ar0100p3050mcc
- ar0716p1080mcd
- as4700z000101a Pericol de explozie prin aprindere, pericol de intoxicare prin inhalare şi înghiţire de carburant cât şi pericol de rănire prin contactul pielii şi ochilor cu carburantul