Preparation for turning liner collar seat

Tip ar · temă 01.40 · versiune 0102 · 2006-07-25

Valabil pentru: ENGINE 441.980 in MODEL 613.355 /364 /365 ENGINE 402.970, 446.938 in MODEL 613.455 /485

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 01 Motor complet, sistem de ventilaţie motor, chiulasă, carter motor › 01.40 Carter motor, capac carcasă distribuţie, capac de închidere — Seria 441 (modele 980) · Seria 613 (modele 355, 364, 365, 455, 485)

EinPAS 15 Motor › 15.15 Motor cu ardere internă complet/Carcasă motor/Mecanism bielă-manivelă › 15.15.31 Bloc motor/Separator ulei/Aerisire — Seria 441 (modele 980) · Seria 613 (modele 355, 364, 365, 455, 485)

Valabil și pentru motoare/cutii de viteze: 402 970, 446 938

AR01.40-T-9304-03B

Preparation for turning liner collar seat

Workshop equipment

WE58.40-Z-1005-21A

Liner collar seat turning tool

Preparation for turning liner collar seat

T01.40-0028-01

1 Clean cutting tool (1) and turning tool .
Lightly oil cutting tool (1) and the splines.

 When equipment is operated for the first time, remove blue protective paint on the magnetic ring (3) with thinner.

2 Pull quick-adjusting ring (2) in direction of crank and insert cutting tool (1).

 The centering roller (arrow) of the cutting tool must project on the side of the cutting tool mount marked with 'R'. Align cutting tool so that it is centered.