Preparation for turning liner collar seat

Type ar · topic 01.40 · version 0102 · 2006-07-25

Applies to: ENGINE 441.980 in MODEL 613.355 /364 /365 ENGINE 402.970, 446.938 in MODEL 613.455 /485

Where it sits

Function group 1 Engine › 01 Complete engine, crankcase ventilation, cylinder head, crankcase › 01.40 Crankcase, timing case cover, end cover — Series 441 (models 980) · Series 613 (models 355, 364, 365, 455, 485)

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.31 Crankcase/oil separator/ventilation — Series 441 (models 980) · Series 613 (models 355, 364, 365, 455, 485)

Also applies to engines/gearboxes: 402 970, 446 938

AR01.40-T-9304-03B

Preparation for turning liner collar seat

Workshop equipment

WE58.40-Z-1005-21A

Liner collar seat turning tool

Preparation for turning liner collar seat

T01.40-0028-01

1 Clean cutting tool (1) and turning tool .
Lightly oil cutting tool (1) and the splines.

 When equipment is operated for the first time, remove blue protective paint on the magnetic ring (3) with thinner.

2 Pull quick-adjusting ring (2) in direction of crank and insert cutting tool (1).

 The centering roller (arrow) of the cutting tool must project on the side of the cutting tool mount marked with 'R'. Align cutting tool so that it is centered.