ar0120p9530gd

Remove, install oil filler neck with crankcase ventilation

Tip ar · temă 01.20 · versiune 0201 · 2000-12-04

Valabil pentru: ENGINE 668.940 /941 up to 31.8.00 in MODEL 168

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 01 Motor complet, sistem de ventilaţie motor, chiulasă, carter motor › 01.20 Sistem de ventilaţie motor, capac chiulasă — Seria 168 · Seria 668 (modele 940, 941)

EinPAS 15 Motor › 15.15 Motor cu ardere internă complet/Carcasă motor/Mecanism bielă-manivelă › 15.15.31 Bloc motor/Separator ulei/Aerisire — Seria 168 · Seria 668 (modele 940, 941)

EinPAS 15 Motor › 15.15 Motor cu ardere internă complet/Carcasă motor/Mecanism bielă-manivelă › 15.15.43 Baie de ulei/Ştuţ de umplere — Seria 168 · Seria 668 (modele 940, 941)

AR01.20-P-9530GD

Remove, install oil filler neck with crankcase ventilation

19.8.97

ENGINE 668.940 /941 up to 31.8.00 in MODEL 168

Remove, install oil filler neck with crankcase ventilation

P01.20-2006-05

1 Oil filler neck (with crankcase ventilation)

2 Torx bolt

3 Sealing ring

4 Vent hose

5 Torx bolts

6 Intake module

7 Plug connection

8 Plug connection

Removing, installing

1

Detach expansion reservoir of cooling system at body and place to the side

2

Remove intake module (6)

AR09.20-P-1400GD

3

Remove air intake pipe

AR09.10-P-8131GD

4

Detach ventilation hose (4)

5

Separate plug connections (7) and (8)

6

Detach oil filler neck (1) at cylinder head cover and lift up and out

Installation: Replace seal (3)

If oil filler neck is replaced

detach crankcase ventilation at oil filler neck

7

Install in the reverse order

Documente menționate