ar0100p241003rf

Disconnect engine wiring harness for removal of engine

Tip ar · temă 01.00 · versiune 0101 · 2016-04-26

Valabil pentru: Engine 651 in model 253

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 1 Motor › 01 Motor complet, sistem de ventilaţie motor, chiulasă, carter motor › 01.00 Generalităţi — Seria 253 · Seria 651

EinPAS 25 Rețea de bord/Rețea/Multi-funcție › 25.25 Cablaj principal › 25.25.20 Cablaj motor — Seria 253 · Seria 651

AR01.00-P-2410-03RF

Disconnect engine wiring harness for removal of engine

Engine

651 in model 253

Disconnect engine wiring harness for removal of engine

1

Disconnect electrical connection (1) on CDI control unit (N3/9).



2

Disconnect electrical connection (2) for oxygen sensor upstream of catalytic converter.



3

Disconnect vehicle interior and engine wiring harness (X26) electrical connection.



4

Disconnect electrical connection (3) for temperature sensor upstream of CAT.



5

Remove cover (4).



6

Detach electrical lines (5, 6, 7, 8) at firewall and fix to engine.


Do not mix up electrical lines (5, 6, 7, 8); mark if necessary.


P01.00-3518-06

Disconnect engine wiring harness for removal of engine

7

Vehicles with code 427 (7G-TRONIC)
Disconnect electrical connection (11) from intelligent servo module for DIRECT SELECT (A80).



8

Disconnect electrical connection from electrical auxiliary oil pump (M42).



9

Vehicles with code 427 (7G-TRONIC)
Detach heat shield (9) from transmission.



10

Vehicles with code 427 (7G-TRONIC)
Disconnect electrical connection (10) from fully integrated transmission control controller unit (Y3/8).



11

Detach transmission housing ground line at body.


P01.00-3519-11