Leading axle spring shackle bolt - filling supply reservoir

Tip ap · temă 32.00 · versiune 0103 · 2005-06-08

Valabil pentru: MODELS 934.233 ## up to 893558, 944.233 ## up to 909057, 954.233 with FRONT AXLE 739.580

Nu este disponibil în „ro”; afișat în Engleză.

Încadrare

Grupă funcțională 2 Sistem de rulare › 32 Suspensie › 32.00 Generalităţi — Seria 934 (modele 233) · Seria 944 (modele 233) · Seria 954 (modele 233)

EinPAS 20 Sistem de rulare › 20.16 Suspensie › 20.16.31 Generare presiune/Recipient/Bloc de comandă — Seria 934 (modele 233) · Seria 944 (modele 233) · Seria 954 (modele 233)

Valabil și pentru motoare/cutii de viteze: 739 580

AP32.00-W-3221A

Leading axle spring shackle bolt - filling supply reservoir

6.6.01

MODELS 934.233 ## up to 893558,
944.233 ## up to 909057,
954.233
with FRONT AXLE 739.580

N32.00-2011-11

1	Clean lubricating nipple and supply reservoir of spring shackle bolt using a cleaning cloth.
2	Remove cap from lubricating nipple.
3	Fill left and right supply reservoirs up to red mark (arrow) on sightglass	 Do not use a high-pressure grease gun to fill the supply reservoirs otherwise the spring shackle bolt may be irreparably damaged.
		 Remove grease which has escaped at the lubrication points.
	Wheel bearing grease (NLGI grade 2)	Sheet 267.1	BB00.40-P-0267-01A
4	Fit cap on lubricating nipple.